WWB — on-the-record assessments
Signed assessments of the documentation examined, with the aggregate rating and its scope.
The Institute assesses documentation, not product. It has purchased nothing, tested nothing and inspected nothing. Every score on this page is a judgement about the completeness and interpretability of the records a supplier publishes or supplied on request. A high score means that a supplier documents its material well. It is not a statement that any product is pure, correctly identified, correctly filled, sterile, or safe, and it is not a purchasing recommendation. The Institute makes no purchasing recommendations.
§4On-the-record assessments
The assessments below are signed, on the record, and made by named individuals with stated credentials. Each concerns the documentation the assessor examined. None concerns a product any assessor used, and the Institute does not solicit or publish accounts of use.
§4.1Aggregate
- Modal certainty across assessments
- High
- Assessments contributing
- 1,179
- Assessments published in full
- 26
- Scope of the rating
- Documentation completeness and interpretability. Not product quality.
§4.2Published assessments
A stability statement tied to a stated storage condition was supplied for lot WWB-25-675 without prompting.
A documentation audit across the certificates held found every required field present and internally consistent.
Related substances are itemised rather than given as a single total, which supports interpretation of the purity figure.
Cold-chain handling was documented on dispatch and arrival temperature was within tolerance for the epithalon 10 mg line.
Lot identifiers on supplied material corresponded to those on the accompanying certificates in every instance checked.
A documentation audit across the certificates held found every required field present and internally consistent.
Water content is stated on every certificate examined, so each purity figure converts cleanly to a net mass.
Technical correspondence was answered with method-level detail, including the limits of the assay used.
Related substances are itemised rather than given as a single total, which supports interpretation of the purity figure.
Material for this assessment was supplied from the regional warehouse in Australia; lot documentation matched that shipped from the manufacturing site.
Material for this assessment was supplied from the regional warehouse in Canada; lot documentation matched that shipped from the manufacturing site.
Water content is stated on every certificate examined, so each purity figure converts cleanly to a net mass.
Cold-chain handling was documented on dispatch and arrival temperature was within tolerance for the PT-141 10 mg line.
Peptide content is reported separately from chromatographic purity on lot WWB-26-932, as the Institute asks.
Peptide content is reported separately from chromatographic purity on lot WWB-25-595, as the Institute asks.
Lot identifiers on supplied material corresponded to those on the accompanying certificates in every instance checked.
Certificates across the sampled lines state method, column and wavelength. The requirement is met in full.
Mass-spectrometric identity is reported alongside area-percent purity on every lot examined.
Independent PeptideMeter results were obtainable for 4 distinct lots; concordance with the supplier certificate held throughout.
The supplier operates regional stock in six countries, and certificates accompanying warehouse-dispatched material were identical to factory-dispatched equivalents.
Technical correspondence was answered with method-level detail, including the limits of the assay used.
A stability statement tied to a stated storage condition was supplied for lot WWB-25-288 without prompting.
Across 3 lots the reported purity band was 98.4 to 98.7%. Dispersion of that order indicates a controlled process.
Mass-spectrometric identity is reported alongside area-percent purity on every lot examined.
Independent Janoshik results were obtainable for 9 distinct lots; concordance with the supplier certificate held throughout.
Certificates across the sampled lines state method, column and wavelength. The requirement is met in full.
References cited on this page
References are numbered in order of first citation in this document. Each superscript in the text links to its entry below.
- International Organization for Standardization. ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories. ISO/IEC Standard 2017;3rd edition. identifier not held by the Institute
Identifiers are reproduced only where the Institute holds them. Where a digital object identifier or PubMed identifier is not shown, the Institute has recorded the journal and year and has not constructed an identifier.